Proposed Rate List
of Product

Manufacturing and supply of 40mm Solid Engineered Wood Regular Timber Door (RD) and frame. Door sash shall be 40 mm thick door Sash comprising 28 mm Core, 6 mm HDF, and 0.7mm HPL on both sides, pressed with crosslink D3/D4 glue at 90°C with 6kg/cm2 pressure. Edge banded with 2mm ABS or PVC edgeband material, with hotmelt glue applied at 120°C, 1mm premilling, with a 6000 rpm diamond tool. Stile, Rail and Frames shall be made of highly compressed Engineered Timber, density >800 kg/m3, with a 52mm-thick and 100mm-wide frame finished with 0.8 mm HPL or CPL on exposed faces and 2 mm edge banding on exposed edges, complete with 12 mm door stopper with matching HPL or CPL, and 1 mm thick matching edgebanding on exposed edge of door stopper.

Manufacturing and supply of 35 mm Solid Engineered Wood Regular Timber Door (RD) and frame. Door sash shall be 35 mm thick door Sash comprising 25mm Core, 6 mm HDF, and 0.7mm HPL on both sides, pressed with crosslink D3/D4 glue at 90°C with 6kg/cm2 pressure. Edge banded with 2mm ABS or PVC edgeband material, with hotmelt glue applied at 120°C, 1mm premilling, with a 6000 rpm diamond tool. Stile, Rail and Frames shall be made of highly compressed Engineered Timber, density >800 kg/m3, with a 52mm-thick and 100mm-wide frame finished with 0.8 mm HPL or CPL on exposed faces and 2 mm edge banding on exposed edges, complete with 12 mm door stopper with matching HPL or CPL, and 1 mm thick matching edgebanding on exposed edge of door stopper.

Manufacturing and supply of 30 mm Solid Engineered Wood Regular Timber Door (RD) and frame. Door sash shall be 35 mm thick door Sash comprising 25mm Core, 3mm HDF, and 0.7mm HPL on both sides, pressed with crosslink D3/D4 glue at 90°C with 6kg/cm2 pressure. Edge banded with 2mm ABS or PVC edgeband material, with hotmelt glue applied at 120°C, 1mm premilling, with a 6000 rpm diamond tool. Stile, Rail and Frames shall be made of highly compressed Engineered Timber, density >800 kg/m3, with a 52mm-thick and 100mm-wide frame finished with 0.8 mm HPL or CPL on exposed faces and 2 mm edge banding on exposed edges, complete with 12 mm door stopper with matching HPL or CPL, and 1 mm thick matching edgebanding on exposed edge of door stopper.

Manufacturing and supply of factory-manufactured door L-architrave made from well-seasoned plywood or approved engineered wood, consisting of 12 mm thick × 70 mm wide surface to cover the gap between frame and wall, and a 6 mm thick × 50 mm wide L-shaped leg inserted into the pre-machined groove of the frame provided in the door frame, suitable for wall thickness from 125 mm to 205 mm, finished with matching melamine wrap or PVC wrap as approved. Adhesives for profile wrapping shall be moisture-resistant reactive PUR hot melt suitable for PVC, ABS or laminate wrapping.

Manufacturing and supply of factory-manufactured door Flat architrave made from well-seasoned plywood or approved engineered wood of 12 mm thick and 70 mm wide finished with matching melamine wrap or PVC wrap as approved. Adhesives for profile wrapping shall be moisture-resistant reactive PUR hot melt suitable for PVC, ABS or laminate wrapping.

Manufacturing and supply of factory-manufactured skirting made from well-seasoned plywood or approved engineered wood, consisting of 6 mm thick × 80-100 mm wide finished with melamine wrap or PVC wrap as approved. Adhesives for profile wrapping shall be moisture-resistant reactive PUR hot melt suitable for PVC, ABS or laminate wrapping.

Manufacturing and Supply of furnitures like wardrobe, tables top, cabinets, office desk of 25mm High Moisture Resistance (HMR) MFC E1 V313 particleboard laminated on both sides with >70gsm Melamine paper and same material as balancer on the back. Pressed in Short-Cycle press at >85kg/cm2, heat >175°C~200°C, and abrasion tested under IS 12823 specifications. Moisture resistance properties 24 hrs tests should not exceed 7% swelling. Density >750 kgs/m3, internal bonding of core material >60N mm2 (min) for screw holding properties and crushing strength to withstand extensive usage. Edges will be sealed with 1mm PVC or ABS applied by industrial machines with hotmelt glue from Jowat / Henkel / Taka.

Manufacturing and Supply of furnitures like wardrobe, tables, cabinets, kitchen units, office desk of 18 mm High Moisture Resistance (HMR) MFC E1 V313 particleboard laminated on both sides with >70gsm Melamine paper and same material as balancer on the back. Pressed in Short-Cycle press at >85kg/cm2, heat >175°C~200°C, and abrasion tested under IS 12823 specifications. Moisture resistance properties 24 hrs tests should not exceed 7% swelling. Density >750 kgs/m3, internal bonding of core material >60N mm2 (min) for screw holding properties and crushing strength to withstand extensive usage. Edges will be sealed with 1mm PVC or ABS applied by industrial machines with hotmelt glue from Jowat / Henkel / Taka.

Manufacturing and Supply of furnitures backcover like wardrobe, cabinets, kitchen units of 8 mm High Moisture Resistance (HMR) MFC E1 V313 particleboard laminated on both sides with >70gsm Melamine paper. Pressed in Short-Cycle press at >85kg/cm2, heat >175°C~200°C, and abrasion tested under IS 12823 specifications. Moisture resistance properties 24 hrs tests should not exceed 7% swelling. Density >750 kgs/m3, internal bonding of core material >60N mm2 (min) for screw holding properties and crushing strength to withstand extensive usage. Edges will be sealed with 1mm PVC or ABS applied by industrial machines with hotmelt glue from Jowat / Henkel / Taka.

Manufacturing and Supply of Pantry units with Overhead Cabinets made from 18mm thick BWR solid core plywood laminated with 0.7mm HPL with D4 Glue from Henkel, Jowat or Taka in 160T press at 100°C and 1mm PVC or Edgeband applied in industrial machines with hotmelt glue and drilled to perfect accuracy by CNC machine for assembly and installation of accessories, slides and appliances. Shutters made from 18mm Birch ply laminated with 6H hardness acrylic laminated with PUR glue in Barberan, Omma or Hessan machinery having anti finger marks and resistance of common bacteria.

Manufacturing and Supply of Pantry units with Overhead Cabinets made from 18 mm HMR MFC E1 V313 particleboard laminated on both sides with >70gsm Melamine paper and same material as balancer on the back. Pressed in Short-Cycle press at >85kg/cm2, heat >175°C~200°C, and abrasion tested under IS 12823 specifications. Moisture resistance properties 24 hrs tests should not exceed 7% swelling. Density >750 kgs/m3, internal bonding of core material >60N mm2 (min) for screw holding properties and crushing strength to withstand extensive usage. Kitchen parts edges will be sealed with 1mm PVC or ABS applied by industrial machines with hotmelt glue from Jowat / Henkel / Taka and drilled to perfect accuracy by CNC machine for assembly and installation of accessories, slides and appliances. Shutters made from 18mm Birch ply laminated with 6H hardness acrylic laminated with PUR glue in Barberan, Omma or Hessan machinery having anti finger marks and resistance of common bacteria.

Manufacturing and Supply of Pantry units with Overhead Cabinets made from 18 mm HMR MFC E1 V313 particleboard laminated on both sides with >70gsm Melamine paper and same material as balancer on the back. Pressed in Short-Cycle press at >85kg/cm2, heat >175°C~200°C, and abrasion tested under IS 12823 specifications. Moisture resistance properties 24 hrs tests should not exceed 7% swelling. Density >750 kgs/m3, internal bonding of core material >60N mm2 (min) for screw holding properties and crushing strength to withstand extensive usage. Kitchen parts edges will be sealed with 1mm PVC or ABS applied by industrial machines with hotmelt glue from Jowat / Henkel / Taka and drilled to perfect accuracy by CNC machine for assembly and installation of accessories, slides and appliances. Shutters made from 18mm matching HMR MFC E1 V313 board.